Search found 17 matches

by Kalle
Thu 2017-11-09 12:43
Forum: VS1010 Forum
Topic: VS1010B Developer Board Quick Start
Replies: 5
Views: 2021

Re: VS1010B Developer Board Quick Start

Here is the version 0.9 of the Quick Start guide. It has been modified for the Developer Board v1.3 with VS1010C.
by Kalle
Wed 2017-11-08 15:01
Forum: VS1010 Forum
Topic: Controlling VS23S010 with a VS1010
Replies: 2
Views: 1318

Ntsc10c

Ntsc10c is a VS1010C compatible version of the program. It's a straightforward port from the Ntsc10b, and functions exactly the same as the previous version. The only change to the actual code was made in the main.c. The line SetPLL(5); was added to the beginning of the program. This sets the PLL cl...
by Kalle
Mon 2017-10-09 13:03
Forum: VS1010 Forum
Topic: Controlling VS23S010 with a VS1010
Replies: 2
Views: 1318

Ntsc10b explained

This comment has a more in-depth explanation of the ntsc10b. There are also other NTSC programs for the VS23S010 Breakout Board, which can be controlled either with an Arduino, or the on-board TI MSP430G2432. This comment can be used as a guide for those as well, since they are modifications which a...
by Kalle
Wed 2017-09-20 13:35
Forum: VS23S010 Forum
Topic: Compatible MSP430 and Arduino NTSC programs for the VS23S010 Breakout Board
Replies: 0
Views: 1888

Compatible MSP430 and Arduino NTSC programs for the VS23S010 Breakout Board

The individual Arduino and MSP430 versions of the VS23S010 NTSC test image generation have been posted on the forum previously. However, the two older programs aren't compatible with each other. If you try to run a Breakout Board which MSP430 has been programmed with the ntsc_msp430, with an Arduino...
by Kalle
Fri 2017-09-08 13:49
Forum: VS1010 Forum
Topic: Controlling VS23S010 with a VS1010
Replies: 2
Views: 1318

Controlling VS23S010 with a VS1010

The ntsc10b is a VS1010B specific program, which can be used to control a VS23S010 through SPI. With it, the VS23 can generate the pictured test image. The program is originally based on a VS1005 program ntsctest, which has been cut down to only include code that is essential for the test image crea...
by Kalle
Mon 2017-09-04 12:39
Forum: VS23S010 Forum
Topic: Programming the MSP430 of the VS23S010 Breakout Board
Replies: 0
Views: 1533

Programming the MSP430 of the VS23S010 Breakout Board

The VS23S010 Breakout Board features a Texas Instruments MSP430G2432 microcontroller. This post includes the example code and the instructions for using it to control the VS23. The program generates the same test image as the Arduino version , and the code itself is same for the most part. Most diff...
by Kalle
Mon 2017-08-28 9:26
Forum: VS23S010 Forum
Topic: VS23S010 Breakout Board with Arduino
Replies: 0
Views: 2261

VS23S010 Breakout Board with Arduino

The VS23S010 Breakout Board is equipped with a VS23S010D-L, as well as an MSP430G2432 microcontroller. The board can be used on it's own by programming the MSP430 , but this example shows how to control it with an Arduino. The programs in this and the MSP430 post are not compatible, but you can run ...
by Kalle
Thu 2017-08-10 14:24
Forum: VS23S010 Forum
Topic: VS23S010 testmode pin [and Arduino video out]
Replies: 9
Views: 2881

Re: VS23S010 testmode pin

Hello, the program Panu was referencing is available as an Arduino IDE sketch in the download link below. It communicates with the VS23 with SPI, and generates the pictured 320x200 NTSC test image. Most of the program has comments, but is a bit be lacking here and there. I'll post some more document...
by Kalle
Fri 2017-06-30 12:34
Forum: VS1010 Forum
Topic: VS1010 Real-Time Clock
Replies: 3
Views: 901

VS1010 Date

This program has been ported from the VS1005. The code has been shortened by removing everything unused. Some incompatible features have also been removed. Date is used to print the current RTC counter time in a human-readable form. Parameters are optional, but they allow use of different printing f...
by Kalle
Wed 2017-06-28 15:31
Forum: VS1010 Forum
Topic: VS1010 Real-Time Clock
Replies: 3
Views: 901

VS1010 SetDate

This program has been ported from the VS1005. The code has also been shortened by removing everything unused. SetDate can be used to set the date and/or time of the RTC. In addition to rtc and time, mktime.c and the ParamSpl program are required. SetDate is presented here in three parts. #include <v...