VSDSP Forum

One thing.
My program:

Total words: I 1407, X 317, Y 0

Hi, thanks for quick answer. Fist I've tried to start it from config. (usercode.dlx already in SPI): C#0d1fcd VS1010D VSOS 4.20 Files:6. Buffers:3. Runlevel 7 SPIF:c214, 2048K SD:120 MiB SpiCacheDrv v7 S: SPI Flash c214 Runlevel 7 MyMP3 <- message from config Reset virtual memory BootFromX(BOOT.X) L...

Hi Panu, thank you very much for update. Unfortunately my VS1010 write me others messages as awaiting. With boot.x (from VirtualSD) VS1010>bootx s:boot.x bootx s:boot.x Reset virtual memory BootFromX(BOOT.X) Loaded 746 bytes. VLoad Ok. S1010> and the new one: VS1010>bootx s:boot.x bootx s:boot.x Res...

Hallo, first impressions. In UART controlled mode works well with different bitrates. Semi controlled (manual "bootx s:boot.x" and then start my dlx-programm) failed. It looks, my programm take too much of MCU resources. Following messages I get back: OGG 64kbps C$SUM FAIL: 20000:V620=1 OGG 112kbps ...

Hi Panu,

it works!
For your files: I use MX25L1606E SPI memory.

Unfortunately, I can play only in terrminal mode.
Where can I find "vs1010dRom.h"?

Many thanks
AM

Found solution! No action necessery.
Thanks

Hi, how can I set the VS1010 sd card connections to low (or preferably to inputs / tristate) via the serial GPIO. If this is not possible then how can i do it programmed from SPI memory? The reason is the use of the S8 SD card controller, which requires programming. The programming uses the SD conne...

Hi,

Q. is ReplayGain supported in VS1010D?
If yes, pls a few hints how to use it.

thanks and best regards

am

Yes, thank you.

Arek

Hi,

With 100k pull up/pull down works well.

Thx