Writing software for systems that use VLSI Solution's devices as slave codecs to a host microcontroller.
- Posts: 1
- Joined: Thu 2019-04-04 4:53
Version 1.31 of the VS1053b data sheet provides sample code on p. 17 for reading DREQ status through the DREQ register (address 0xC012), but on p. 73 this register is described as write-only. Which is correct?
- VLSI Staff
- Posts: 1655
- Joined: Thu 2010-07-15 16:04
SER_DREQ can also be read. (Will be fixed in the next datasheet update.)