Ethernet

Discussion about writing software for VS1005 and the VSOS Operating System. Also posts about VS1005-related hardware design and device drivers should be posted here.
Post Reply
sridhar
User
Posts: 2
Joined: Wed 2017-08-30 13:36

Ethernet

Post by sridhar » Wed 2017-08-30 14:43

Dear sir,
i am sridhar Design engineer.
In VS1005 how to interface Ethernet ,is it required external isolation transformer?
in my observation ETH_TXP , ETH_TXN and ETH_RXP only available
Please guid hardware interface of ethernet.

User avatar
Panu
VLSI Staff. Currently on holiday.
Posts: 2679
Joined: Tue 2010-06-22 13:43

Re: Ethernet

Post by Panu » Sun 2017-09-03 7:44

Please take a look at the vs1005 developer board for schematics. External transformer filter is required.
Info: Line In and Line Out, VS1000 User interface, Overlay howto, Latest VSIDE, MCU Howto, Youtube
Panu-Kristian Poiksalo, VLSI Solution Oy

sridhar
User
Posts: 2
Joined: Wed 2017-08-30 13:36

Re: Ethernet

Post by sridhar » Mon 2017-10-09 8:45

Dear sir,
I am sridhar,This VS1005 will work for telephone application? it meen at a time Ethernet data will in speaker out and MIC data will put in Ethernet.
Please clarify.

User avatar
Panu
VLSI Staff. Currently on holiday.
Posts: 2679
Joined: Tue 2010-06-22 13:43

Re: Ethernet

Post by Panu » Mon 2017-10-09 9:15

Hi!
This VS1005 will work for telephone application? it meen at a time Ethernet data will in speaker out and MIC data will put in Ethernet.
Sure, it's possible but you'll need to develop most of the software yourself.

-Panu
Info: Line In and Line Out, VS1000 User interface, Overlay howto, Latest VSIDE, MCU Howto, Youtube
Panu-Kristian Poiksalo, VLSI Solution Oy

Post Reply