How to use own memory with SPI hardware driver DevHwSpi

Discussion about writing software for VS1005 and the VSOS Operating System. Also posts about VS1005-related hardware design and device drivers should be posted here.
mar_tin
User
Posts: 14
Joined: Thu 2018-03-08 14:04

Re: How to use own memory with SPI hardware driver DevHwSpi

Post by mar_tin » Fri 2018-05-25 16:31

Thank you for the clarification, Panu.

I tried to disable the reserved sectors for this drive because I already have reserved sectors on another drive (internal flash). Anyways, I don't really need this bit of space, so I'll just go with default RESERVED_SECTORS. There are some warnings during build, I'll take a look at it more deeply on monday.

Martin.

mar_tin
User
Posts: 14
Joined: Thu 2018-03-08 14:04

Re: How to use own memory with SPI hardware driver DevHwSpi

Post by mar_tin » Tue 2018-05-29 9:40

Hello again,
so I've used original files with default RESERVED_SECTORS macro, but the size is still being reported as 8x the expected size. Also, when I use the 512 vlaue as size value, the reserved memory is 1MByte, so the total size of the drive is 3MByte.

Anyways, I can probably live with this.

Martin.

Post Reply