VSOS UART Shell

Discussion about writing software for VS1005 and the VSOS Operating System. Also posts about VS1005-related hardware design and device drivers should be posted here.
User avatar
Mark
Senior User
Posts: 22
Joined: Thu 2015-06-04 5:37

Re: VSOS UART Shell

Post by Mark » Mon 2016-05-23 21:38

Panu,

The console output if from our design which has 6 COM ports, the one that I captured from is the stdio port for debug and the messages are formatted by our firmware.

Could you provide some focused guidance on the best/easiest path to upgrade the kernel.

Also, I would like to forward you our schematic of the VS1005 BOB section of the design, it there a way for me to forward this directly rather than through the forum?

Thank You,
Mark

User avatar
Panu
VLSI Staff
Posts: 2406
Joined: Tue 2010-06-22 13:43

Re: VSOS UART Shell

Post by Panu » Tue 2016-05-24 8:23

Hi!

There's a (rather old) video for updating the kernel at the forum and in Youtube: viewtopic.php?t=1273#p5655

The procedure is for the developer board, and for the breakout board it's essentially the same except you need to use the "Internal flash programming utility" of VSIDE instead of the external. The BOB doesn't have switches, so you need to use a jumper to access the internal flash via USB, which you've done already.

Some generic instructions:
http://www.vlsi.fi/fileadmin/evaluation ... 05-BOB.txt
http://www.vlsi.fi/en/support/evaluatio ... board.html

You can send your schematic to our support at support@vlsi.fi, but email is unreliable so wait for our confirmation that we have received it.

-Panu
Info: Line In and Line Out, VS1000 User interface, Overlay howto, Latest VSIDE, MCU Howto, Youtube
Panu-Kristian Poiksalo, VLSI Solution Oy

divya
User
Posts: 8
Joined: Wed 2017-05-03 6:57

Re: VSOS UART Shell

Post by divya » Mon 2017-05-15 12:49

Hi,
i have played the by playfile *.mp3 . How to do other functions like pause , record, forward, backward? also please suggest how to control vs1005 through microcontroller

User avatar
Panu
VLSI Staff
Posts: 2406
Joined: Tue 2010-06-22 13:43

Re: VSOS UART Shell

Post by Panu » Mon 2017-05-15 15:16

Hi!

For playing, Henrik has made a program "PLAYDIR" that implements many such functions. It's documented in http://www.vlsi.fi/fileadmin/software/V ... _Shell.pdf. I suggest that you use it instead of "PLAYFILE".

-Panu
Info: Line In and Line Out, VS1000 User interface, Overlay howto, Latest VSIDE, MCU Howto, Youtube
Panu-Kristian Poiksalo, VLSI Solution Oy

divya
User
Posts: 8
Joined: Wed 2017-05-03 6:57

Re: VSOS UART Shell

Post by divya » Tue 2017-05-16 8:18

Hi,
i used the command playdir [+p] but it does not play the file .

User avatar
Henrik
VLSI Staff
Posts: 1035
Joined: Tue 2010-06-22 14:10

Re: VSOS UART Shell

Post by Henrik » Wed 2017-05-17 10:40

Hello!
divya wrote:i used the command playdir [+p] but it does not play the file .
Let's go to the other thread you opened to continue on this subject:
viewtopic.php?f=2&t=2117

Kind regards,
- Henrik
Good signatures never die. They just fade away.

Post Reply

Who is online

Users browsing this forum: No registered users