Latest VS1005 Amp Board Firmware (1.01) available here.

Discussion about writing software for VS1005 and the VSOS Operating System. Also posts about VS1005-related hardware design and device drivers should be posted here.
Locked
User avatar
Henrik
VLSI Staff
Posts: 1035
Joined: Tue 2010-06-22 14:10

Latest VS1005 Amp Board Firmware (1.01) available here.

Post by Henrik » Thu 2016-03-17 9:06

The VS1005 Amp Board is a brand new application development board for VS1005. It features a class D amplifier for direct connection to speakers or speaker elements.

The Amp Board has connectors for analog and digital inputs and outputs as well as speaker outputs. It also features eight LEDs and four buttons for a user interface.

Potential applications for the VS1005 Amp Board are:
  • Active speaker with crossover implemented by the firmware for two speaker elements.
  • Stereo amplifier with equalization filters.
  • Any kind of customized audio media player with a stereo speaker output.
AmpBoard_Mid.jpg
AmpBoard_Mid.jpg (280.1 KiB) Viewed 1107 times
This thread will contain the latest releases of the AmpBoard firmware and documentation. For how to install the software, read the documentation PDF file inside the ZIP file.

To keep this thread from cluttering, this is a locked thread. For any questions on how to get the board running, please open a new thread under the VS1005 and VSOS Software forum.

Kind regards,
- Henrik
Good signatures never die. They just fade away.

User avatar
Henrik
VLSI Staff
Posts: 1035
Joined: Tue 2010-06-22 14:10

VS1005 Amp Board Firmware v1.00

Post by Henrik » Thu 2016-03-17 12:18

Attached to this message is v1.00 of the VS1005 Amp Board Firmware. Read the documentation in the ZIP file for details.

Kind regards,
- Henrik
Attachments
VS1005AmpBoard_v100.zip
VS1005 Amp Board firmware v1.00
(448.23 KiB) Downloaded 132 times
Good signatures never die. They just fade away.

User avatar
Henrik
VLSI Staff
Posts: 1035
Joined: Tue 2010-06-22 14:10

Re: VS1005 Amp Board Firmware v1.01

Post by Henrik » Fri 2016-03-18 11:08

Here is a slight documentation update. The biggest new thing is a mention that this firmware requires at least VSOS 3.27 to work.

Kind regards,
- Henrik
Attachments
VS1005AmpBoard_v101.zip
VS1005 Amp Board firmware v1.01
(423.17 KiB) Downloaded 148 times
Good signatures never die. They just fade away.

Locked

Who is online

Users browsing this forum: No registered users