Solution to dump internal / external flash

Discussion about writing software for VS1005 and the VSOS Operating System. Also posts about VS1005-related hardware design and device drivers should be posted here.
Post Reply
User avatar
Henrik
VLSI Staff
Posts: 1180
Joined: Tue 2010-06-22 14:10

Solution to dump internal / external flash

Post by Henrik » Thu 2016-06-02 9:36

Hello!

Attached to this post is a VS1005g VSOS metasolution that dumps the contents of either the internal or external SPI memory to a file. To use it, open the solution in VSIDE, then follow the instructions in the README.TXT file.

Kind regards,
- Henrik
Attachments
DumpFlash.zip
Metasolution that dumps contents of internal or external SPI memory to a file.
(6 KiB) Downloaded 216 times
Good signatures never die. They just fade away.

User avatar
Henrik
VLSI Staff
Posts: 1180
Joined: Tue 2010-06-22 14:10

Re: Solution to program internal / external flash

Post by Henrik » Fri 2016-07-29 15:20

Attached to this post is a VS1005g VSOS metasolution that programs the contents of an image file to either the internal or external SPI memory. To use it, open the solution in VSIDE (YOU NEED VSIDE 2.40 OR NEWER!!!), then follow the instructions in the README.TXT file.

If you are still running VSIDE 2.39 or older, the newest current version is available at: http://www.vlsi.fi/en/support/software/vside.html
(Note: The Help page of VSIDE 2.40 says it is 2.39, but it is still v2.40.)

Kind regards,
- Henrik
Attachments
ProgramFlash.zip
Meta solution to program VS1005g internal / external FLASH. See README.TXT for details
(6.22 KiB) Downloaded 169 times
Good signatures never die. They just fade away.

Post Reply