Exitting from RdsRadio Application

Discussion about writing software for VS1005 and the VSOS Operating System. Also posts about VS1005-related hardware design and device drivers should be posted here.
Post Reply
isonthomas
Senior User
Posts: 145
Joined: Mon 2016-08-22 8:20

Exitting from RdsRadio Application

Post by isonthomas » Thu 2016-09-01 12:47

Hi

As highlighted before we have divided our main application into several small application. One of them is RdsRadio which is the same source code provided by you(viewtopic.php?f=13&t=1531&start=40). After exiting from this application, if we try to read any file from any storage media (SD or USB), then the application is crashing. Do we need to perform some additional operation to free any memory used in RdsRadio?

Please find the console output when we try to execute RdsRadio 2nd time without reboot
Closing... ok.<LF>
ZeroPtrCall from 4281(0x10b9) ZeroPtrCall from 3003(0x0bbb) ZeroPtrCall from 3030(0x0bd6) ZeroPtrCall from 3057(0x0bf1) ZeroPtrCall from 3084(0x0c0c) ZeroPtrCall from 3111(0x0c27) ZeroPtrCall from 3138(0x0c42) E'Out of bufs'<LF>
E'Out of descriptors'<LF>
E'TRACE not found'<LF>
<LF>
i0=3123(0x0c33) E'Out of bufs'<LF>
E'Out of descriptors'<LF>
E'TRACE not found'<LF>
<LF>
E'Out of bufs'<LF>
E'Out of descriptors'<LF>
E'TASKS not found'<LF>
<LF>
Starting POST-CRASH SHELL, be careful.<LF>
E'Out of bufs'<LF>
E'Out of descriptors'<LF>
-Ison

Post Reply