unexpected error

Discussion about writing software for VS1005 and the VSOS Operating System. Also posts about VS1005-related hardware design and device drivers should be posted here.
Post Reply
vinayslone
Senior User
Posts: 38
Joined: Tue 2020-11-10 12:34

unexpected error

Post by vinayslone » Tue 2020-12-15 9:18

hello vlsi team,

please resolve below issue !
I am trying to setup shell on my customized vs1005 board.

Thankyou !
Attachments
Screenshot (7).png
Screenshot (7).png (391.81 KiB) Viewed 391 times
Top
User avatar
Panu
VLSI Staff
Posts: 2780
Joined: Tue 2010-06-22 13:43

Re: unexpected error

Post by Panu » Tue 2020-12-15 16:36

Using USB, copy the root files to the SPI flash. The root has SYS folder which has the VS1010 drivers, libraries and executables. One of these is S:SYS/GETCMD.DL3, which must be found for the shell to be able to get command line input. It's not found, so you get the error.

-Panu
Info: Line In and Line Out, VS1000 User interface, Overlay howto, Latest VSIDE, MCU Howto, Youtube
Panu-Kristian Poiksalo, VLSI Solution Oy
Top
Post Reply

Return to “VS1005 and VSOS Software”