Do you have VS1005H?

Discussion about writing software for VS1005 and the VSOS Operating System. Also posts about VS1005-related hardware design and device drivers should be posted here.
Post Reply
Senior User
Posts: 62
Joined: Fri 2014-07-04 15:51

Do you have VS1005H?

Post by winwan »

That's not in the specifications

Code: Select all

Master mode drivers  are limited to one of the following sample rate
and bit rate configurations:
   Sample rate   Bits   Value in configuration file for Cfg drivers:
-  24 kHz,          32        /-24000  // Only available in VS1005g
-  48 kHz,       16/32   48000/-48000
-  96 kHz,       16/32   96000/-96000
- 192 kHz,       16     192000
- 192 kHz,          32         -192000 // Only available in VS1005h
User avatar
VLSI Staff
Posts: 1271
Joined: Tue 2010-06-22 14:10

Re: Do you have VS1005H?

Post by Henrik »

Hello Winwan!

VS1005h is the follower of VS1005g, and still in (late stages of) development.

We will make a press release and also publish it here on the forums when we have it available as samples.

In preparation for VS1005h we moved to so-called "Universal Binaries" a couple of years ago along with the release of VSOS 3.50. Universal binaries can run on both VS1005g and VS1005h, so compatibility of user software between the two releases is good.

Kind regards,
- Henrik
Good signatures never die. They just fade away.
Post Reply