Page 1 of 1

VSIDE USB UART cable driver

Posted: Thu 2010-09-02 11:17
by Panu
VSIDE UART cable driver for Win2K/WinXP/Vista/Win7.

Note: VLSI USB UART cables have genuine USB UART converter ICs, but in some cases the old ("compatibility version") driver is needed because support for the old converter ICs has been removed by the chip vendor in the new driver. You may need to remove any previously installed cable driver and disable automatic updating for the cable driver for your cable to remain usable after a Windows Update.

Here's some installation instructions for Win10 in case you have trouble: