VSIDE USB UART cable driver

Installing and using VSIDE tools for VLSI Solution's devices that contain a VSDSP signal processor.
Post Reply
User avatar
VSDSP Expert
Posts: 2828
Joined: Tue 2010-06-22 13:43

VSIDE USB UART cable driver

Post by Panu »

VSIDE UART cable driver for Win2K/WinXP/Vista/Win7.

Note: VLSI USB UART cables have genuine USB UART converter ICs, but in some cases the old ("compatibility version") driver is needed because support for the old converter ICs has been removed by the chip vendor in the new driver. You may need to remove any previously installed cable driver and disable automatic updating for the cable driver for your cable to remain usable after a Windows Update.

Here's some installation instructions for Win10 in case you have trouble: https://www.youtube.com/watch?v=H394FnMzeFo
VSIDE UART cable driver, compatibility version (Windows 7, 8, 2012, 10)
(2.16 MiB) Downloaded 1239 times
VSIDE UART cable driver (Windows 2000, XP, Vista, 2003, 7, 2008)
(3.35 MiB) Downloaded 3864 times
Post Reply