VS1053 / VSIDE / VSDSP Book

Installing and using VSIDE tools for VLSI Solution's devices that contain a VSDSP signal processor.
pfaucon
User
Posts: 3
Joined: Mon 2016-02-22 20:09

Re: VS1053 / VSIDE / VSDSP Book

Post by pfaucon » Mon 2016-02-22 20:21

I have received a VS1005 board this morning and have been looking for a quickstart guide for the last hour. The board doesn't come with any printed material.

I figured out browsing through the forums where to download a serial driver.

I am getting a bit aggravated and a bit disappointed. Does one have to buy this book to use the board?

User avatar
pasi
VLSI Staff
Posts: 1713
Joined: Thu 2010-07-15 16:04

Re: VS1053 / VSIDE / VSDSP Book

Post by pasi » Thu 2016-02-25 12:59

The vs1053 book does not help you much with vs1005. There is material for vs1005 in the VSOS forum, there are also some videos.
Visit https://www.facebook.com/VLSISolution VLSI Solution on Facebook

pfaucon
User
Posts: 3
Joined: Mon 2016-02-22 20:09

Re: VS1053 / VSIDE / VSDSP Book

Post by pfaucon » Thu 2016-03-10 19:27

Hello Pasi,

Thanks for your answer. :)
I got most of my stuff working.
I do MP3 recording and log GPS position on the SD card. I want to be able later to connect my device to a PC and see the SD card and its data as a drive on the PC. The acquisition software would not operate when the VS1005 USB is connected to a host.
The GPS is currently connected to the VS1005 through the serial interface but I am considering using the SPI interface instead, if I can get it to work. I would be reserving the serial port as debug, particularly because the GPS is sending data all the time and that interferes with the OS when rebooting.

I still have a few problems, mostly with the FAT32 of the SD card:
- how to use the directories
- how to append to a file (the "a" of fopen doesn't seem to work, is there a work-around?)
- ability to use metadata with the MP3 file - (I suspect I might have to make a copy and add the meta-data at that time)
- how to switch to a mode where I can mount the SD card as a USB slave, (it works fine for the flash but I want to access the flash only in software upgrade mode)

User avatar
Panu
VLSI Staff
Posts: 2747
Joined: Tue 2010-06-22 13:43

Re: VS1053 / VSIDE / VSDSP Book

Post by Panu » Fri 2016-03-11 12:10

The last 4 messages will be moved to the VS1005 section next week.
Info: Line In and Line Out, VS1000 User interface, Overlay howto, Latest VSIDE, MCU Howto, Youtube
Panu-Kristian Poiksalo, VLSI Solution Oy

User avatar
devicedeveloper
Senior User
Posts: 86
Joined: Sun 2016-07-24 11:30

Re: VS1053 / VSIDE / VSDSP Book

Post by devicedeveloper » Mon 2016-07-25 15:33

Hello, Support.

May I order this book from VLSI webstore in PDF file format or not?

May I order this book if I am not company and I am radio-hobbyst?

User avatar
Henrik
VLSI Staff
Posts: 1174
Joined: Tue 2010-06-22 14:10

Re: VS1053 / VSIDE / VSDSP Book

Post by Henrik » Wed 2016-07-27 12:24

Hello,
devicedeveloper wrote:May I order this book from VLSI webstore in PDF file format or not?
The book is only available in printed format.
devicedeveloper wrote:May I order this book if I am not company and I am radio-hobbyst?
Yes you may. It is available at VLSI's Web Shop, here: http://webstore.vlsi.fi/VS1053-Book .

Kind regards,
- Henrik
Good signatures never die. They just fade away.

User avatar
devicedeveloper
Senior User
Posts: 86
Joined: Sun 2016-07-24 11:30

Re: VS1053 / VSIDE / VSDSP Book

Post by devicedeveloper » Wed 2016-07-27 15:12

Henrik, thanks for reply!

Multiple delivery methods - they can choose? Express delivery is available (at an additional cost)?

dapeake
User
Posts: 1
Joined: Fri 2020-01-17 8:26

Re: VS1053 / VSIDE / VSDSP Book

Post by dapeake » Fri 2020-01-17 8:34

Is there any application / how-to detail or examples on ogg or wav encoding in the book?

Dan
San Jose
CA, US

User avatar
pasi
VLSI Staff
Posts: 1713
Joined: Thu 2010-07-15 16:04

Re: VS1053 / VSIDE / VSDSP Book

Post by pasi » Fri 2020-01-17 11:55

dapeake wrote:
Fri 2020-01-17 8:34
Is there any application / how-to detail or examples on ogg or wav encoding in the book?
No, the book teaches how to develop programs that run inside the vs1053. You don't generally need to do any programming for vs1053 if you use it for what it normally does, like decoding and encoding. If you use only vs1053 to implement an application, then you program the whole application with it.

For examples how to encode ogg and wav with a microcontroller, see http://www.vsdsp-forum.com/phpbb/viewto ... f=11&t=840
Visit https://www.facebook.com/VLSISolution VLSI Solution on Facebook

Post Reply