VS1053 MIDI commands

Writing software that inputs and/or outputs audio and performs DSP algorithms such as filters, new codecs or audio effects.
Post Reply
GertBaars
User
Posts: 8
Joined: Sat 2017-09-02 20:54

VS1053 MIDI commands

Post by GertBaars » Sun 2017-10-29 21:53

In the datasheet there is nothing about MIDI commands
for the VS1053. Apart from general MIDI which is
the same for most MIDI devices nothing for instance
about control change messages which are often
device-specific. Any documentation about this?

User avatar
pasi
VLSI Staff
Posts: 1542
Joined: Thu 2010-07-15 16:04

Re: VS1053 MIDI commands

Post by pasi » Mon 2017-10-30 11:55

Does this contain what you are looking for: viewtopic.php?f=10&t=471
Visit https://www.facebook.com/VLSISolution VLSI Solution on Facebook

GertBaars
User
Posts: 8
Joined: Sat 2017-09-02 20:54

Re: VS1053 MIDI commands

Post by GertBaars » Mon 2017-10-30 15:18

The info about reverb seems useful.
Command 2: breath controller and
a few others are missing.

User avatar
pasi
VLSI Staff
Posts: 1542
Joined: Thu 2010-07-15 16:04

Re: VS1053 MIDI commands

Post by pasi » Mon 2017-10-30 15:58

If a controller is missing from the list, it isn't implemented (or if it is implemented for parsing or debugging purposes, the instruments do not use it).
Visit https://www.facebook.com/VLSISolution VLSI Solution on Facebook

Post Reply