Equalizer Plugin and Image Files

Writing software that inputs and/or outputs audio and performs DSP algorithms such as filters, new codecs or audio effects.
Post Reply
bayviewboom
Senior User
Posts: 67
Joined: Wed 2019-11-27 9:49

Equalizer Plugin and Image Files

Post by bayviewboom » Fri 2020-09-04 11:28

Is vs1053b_vs1063a_equ.plg a compressed but otherwise identical copy of vs1053b_vs1063a_equ_sa.img?

Will these two procedures produce the exact same result?

- Load the .plg file into the VS using the steps in Ch 12 of the EQ doc.
- Load the .img file into flash, and boot the VS from the flash.

If not, how are they different?
Top
User avatar
Henrik
VLSI Staff
Posts: 1180
Joined: Tue 2010-06-22 14:10

Re: Equalizer Plugin and Image Files

Post by Henrik » Thu 2020-09-10 9:19

bayviewboom wrote: ↑
Fri 2020-09-04 11:28
 Is vs1053b_vs1063a_equ.plg a compressed but otherwise identical copy of vs1053b_vs1063a_equ_sa.img?

Will these two procedures produce the exact same result?

- Load the .plg file into the VS using the steps in Ch 12 of the EQ doc.
- Load the .img file into flash, and boot the VS from the flash.

If not, how are they different?
The answer to your questions is yes, they are exactly the same Application, just presented in two different loading formats. Use the one that suits your needs best.

Kind regards,
- Henrik
Good signatures never die. They just fade away.
Top
Post Reply

Return to “DSP and Audio Software”