STM32F407VET6 programming options

Writing software that controls the system and peripherals such as displays, SD cards, Buttons, LEDs, Serial Ports etc.
Post Reply
chulian
User
Posts: 5
Joined: Mon 2017-04-17 8:06

STM32F407VET6 programming options

Post by chulian »

Hi everyone,
I purchased a STM32F407VET6(https://www.kynix.com/components/STM32F ... tures.html) (Black) board based on the recommendations of the wiki and have done a large amount of reading and trial and error.
I have been unable to get this board working with the Arduino IDE and USB (though I have had some success with the STM Discovery F4 (MB997B).
I have tried to program the STM32F407VET6 with the STlink on the STM Discovery F4 (MB997B) but have had no success with that either. I am using OSX if that makes a difference.
I would like to know if someone could tell me exactly how I can start programming the STM32F407VET6 with the Arduino IDE and USB or with the Arduino IDE and STlink?
Post Reply