Two VS1003 left and right channels in parallel output

Writing software that controls the system and peripherals such as displays, SD cards, Buttons, LEDs, Serial Ports etc.
Post Reply
lwh1119
User
Posts: 6
Joined: Wed 2012-08-01 4:32

Two VS1003 left and right channels in parallel output

Post by lwh1119 » Tue 2013-01-08 8:01

Can the two VS1003 left and right channels in parallel output it?
Attachments
LEFT.png
left.sch
LEFT.png (1.14 KiB) Viewed 1378 times

compuphase
User
Posts: 16
Joined: Wed 2012-10-10 13:40

Re: Two VS1003 left and right channels in parallel output

Post by compuphase » Tue 2013-01-08 13:22

You should add resistors in series with the capacitors, to limit the maximum current. I would suggest 220 Ohm, but it is not critical (100 Ohm would probably be fine and 1 kOhm probably as well).

Post Reply