Polarized vs nonpolarized capacitor

Designing hardware that use VLSI Solution's devices as the system controller for the entire design.
Post Reply
Posts: 3
Joined: Thu 2016-02-11 19:35

Polarized vs nonpolarized capacitor

Post by Chio » Sat 2016-06-25 0:09


I am planning to design our own pcb based on the vs8053. From looking at various example schematics for the audio ICs, some capacitor symbols have a '+' and some don't. I am assuming the '+' symbol refers to polarized capacitors. For examples, please look at the red circles from the attached image. Would there be any loss in performance if I used only nonpolarized capacitors for all the capacitors in the schematic? It would be great if I can stick with only using ceramic(nonpolarized) capacitors. Any feedback is appreciated.

schematic_polarized_cap.PNG (51.25 KiB) Viewed 1341 times

Post Reply