[Solved] Equalizer for VS1003?

Designing hardware that use VLSI Solution's devices as the system controller for the entire design.
Post Reply
bayviewboom
Senior User
Posts: 67
Joined: Wed 2019-11-27 9:49

[Solved] Equalizer for VS1003?

Post by bayviewboom » Wed 2019-11-27 9:55

I found your equalizer firmware for the VS1053
http://www.vlsi.fi/fileadmin/software/V ... alizer.pdf

Is there standalone equalizer available for the VS1003?

i don't see one here
http://www.vlsi.fi/fileadmin/presentati ... lugins.pdf

thx!
Last edited by bayviewboom on Thu 2019-12-05 6:12, edited 1 time in total.
Top
User avatar
pasi
VLSI Staff
Posts: 1750
Joined: Thu 2010-07-15 16:04

Re: Equalizer for VS1003?

Post by pasi » Wed 2019-11-27 15:12

You're right, there is no version for vs1003b. (A direct port is not possible because the ADC is different and there is less instruction memory.)

If EQ is all you would like to run, check the vs8053b variant.
Visit https://www.facebook.com/VLSISolution VLSI Solution on Facebook
Top
bayviewboom
Senior User
Posts: 67
Joined: Wed 2019-11-27 9:49

Re: Equalizer for VS1003?

Post by bayviewboom » Wed 2019-11-27 17:43

Thx.

How much effort to port the EQ to the 1003?
Or, does VLSI have any plans to make an EQ for the 1003?

Thx!
Top
Post Reply

Return to “Stand-Alone Applications”