VS1005 Application Note: Getting Started with Developer Board

Discussion about writing software for VS1005 and the VSOS Operating System. Also posts about VS1005-related hardware design and device drivers should be posted here.
Post Reply
User avatar
Henrik
VLSI Staff
Posts: 1131
Joined: Tue 2010-06-22 14:10

VS1005 Application Note: Getting Started with Developer Board

Post by Henrik » Fri 2016-06-24 13:39

Hello!

It is with great pleasure that we release a new VS1005 Application Note: Getting Started with Developer Board.

The new document is a first steps guide on how to connect with the VS1005 DevBoard, how to update its firmware, how to interact with it, and how to write software to it. The document is intended for users that are not yet familiar with how VS1005 and VLSI Solution's Integrated Development Environment VSIDE work.

The document (ZIP file containing PDF documentation and an example VSIDE Solution) is available for download at:
http://www.vlsi.fi/fileadmin/app_notes/ ... tarted.zip

If you have any comments and suggestions for how to enhance this documentation, you are welcome to comment on this thread.

Kind regards,
- Henrik
Good signatures never die. They just fade away.

User avatar
Panu
VLSI Staff
Posts: 2649
Joined: Tue 2010-06-22 13:43

Re: VS1005 Application Note: Getting Started with Developer Board

Post by Panu » Tue 2016-06-28 9:01

For easier access and searching online, here's the PDF file extracted from the previous post.

-Panu
Attachments
VS1005GettingStarted.pdf
(473.99 KiB) Downloaded 333 times
Info: Line In and Line Out, VS1000 User interface, Overlay howto, Latest VSIDE, MCU Howto, Youtube
Panu-Kristian Poiksalo, VLSI Solution Oy

Post Reply