USB VID & PID

Designing hardware and software for systems that use the VS1010 MP3 Audio DSP Microcontroller.
Post Reply
Arek
Senior User
Posts: 73
Joined: Thu 2016-09-01 10:58

USB VID & PID

Post by Arek » Mon 2019-04-15 13:55

Hi,

how can I set USB Vendor ID & Product ID (and, of course, vendor and product)
I've seen somewhere in the forum a code with VLSI as vendor but can not found.
With search function in VS1010 forum I get no results. (OK, one:).

Many thanks
am

Arek
Senior User
Posts: 73
Joined: Thu 2016-09-01 10:58

Re: USB VID & PID

Post by Arek » Today 11:58

Hi,

perhaps it is so obvious that it does not require any explanation.

Anyway, I found a little in VS1000 (not in VS1010 or VS1005):
- a pdf, "VS1000 PROGRAMMER’SGUIDE", p.30
http://www.vlsi.fi/fileadmin/app_notes/guide_vs1000.pdf

- and code example for VS1000:
www.vlsi.fi/fileadmin/software/VS1000/t ... r/spiusb.c

Trying with VS1010 I get div. errors:
"undefined identifier 'DT_VENDOR'"
"Macro redefinition of MODEL_NAME_LENGTH"
<stdin> (1) ERROR 0: preprocessing failed

and so on...

Any tips???

Post Reply