VSIDE v2.46 example solutions not compiling.

Installing and using VSIDE tools for VLSI Solution's devices that contain a VSDSP signal processor.
Post Reply
Posts: 1
Joined: Tue 2020-03-10 21:34

VSIDE v2.46 example solutions not compiling.

Post by stover » Tue 2020-03-10 21:57


I just downloaded and installed VSIDE v2.46 on a Windows 7 machine. I created a new VS1000 project (the built in VS1000 Hello World) but it will not compile due to an error. Is this a known issue? Is there a workaround? Thank you for your help.


Build started. Project: MyProject, configuration: Emulation-Debug

Build failed!

lcc -g -hhw_desc -O6 -fsmall-code -DDEBUG -Iinclude -IC:\Program\ Files\ (x86)\VSIDE\libvs1000 -o Emulation-Debug\main.o C:\Users\stover\Documents\solutions\MySolution5\main.c
C:\Users\stover\AppData\Local\Temp\make81082.sh: line 1: syntax error near unexpected token `('
C:\Users\stover\AppData\Local\Temp\make81082.sh: line 1: `lcc -g -hhw_desc -O6 -fsmall-code -DDEBUG -Iinclude -IC:\Program\ Files\ (x86)\VSIDE\libvs1000 -o Emulation-Debug\main.o C:\Users\stover\Documents\solutions\MySolution5\main.c
C:\Program Files (x86)\VSIDE\bin\make.exe: *** [Emulation-Debug\main.o] Error 2

User avatar
VLSI Staff
Posts: 2798
Joined: Tue 2010-06-22 13:43

Re: VSIDE v2.46 example solutions not compiling.

Post by Panu » Fri 2020-03-13 19:20


Usually this error occurs when there is another microcontroller development tool installed in the PC and the MAKE program from that tool in run instead of the MAKE program supplied with VSIDE, for some reason. Do you think this might be the case in your case?

Info: Line In and Line Out, VS1000 User interface, Overlay howto, Latest VSIDE, MCU Howto, Youtube
Panu-Kristian Poiksalo, VLSI Solution Oy

Post Reply