Page 1 of 1

VS23S010D-L Pin Pitch

Posted: Sat 2020-12-26 0:53
by Kokovec

In looking through the datasheet I can't seem to find any information on the pin pitch for the LQFP48 package.
The datasheet does refer to a package outline drawing but there are two pitches shown for the 7x7 size package.
Is it 0.5mm or 0.8mm?



Re: VS23S010D-L Pin Pitch

Posted: Mon 2020-12-28 10:10
by pasi
For the 48-pin LQFP the pin pitch is 0.5mm (see the columns for N = 48).